- #Milocks keypad door knob installation driver#
- #Milocks keypad door knob installation code#
- #Milocks keypad door knob installation free#
#Milocks keypad door knob installation code#
You will discover how useful it is to simply share a code instead of sharing a key. This keyless entry deadbolt and lever combo is a direct replacement for your traditional deadbolt and lever and installs just as easy on both left handed doors and right handed doors 1 1/4"- 1 7/8" thick. A front door would be perfect but an outside gate may require some modification to protect the back module.About our MiLocks® Keyless Entry Keypad Deadbolt and Passage Knob Combo Door Lock Model DFK-02:īring new excitement and convenience to your home with this keypad entry deadbolt and passage lever handle door lock by MiLocks. While the front assembly is weather resistant, the back module needs to be protected from the weather. If you do not currently have an Insteon system, you will also need a Insteon Hub. You will need to purchase an Insteon Lock Controller to enable this feature. Smartphone capabilities are only available on W-Series Locks and X-Series locks. We recommend you replace batteries at least once a year.Ĭan I use my smartphone to operate the door lock?
#Milocks keypad door knob installation free#
Once you have cycled it a few times the thumb turn should be free again.īattery life depends on how often the lock is operated.
To fix this simply replace the batteries with a good set of new batteries and cycle the lock a few times using the keypad or key fob. This is a common issue for door knobs which is caused by low batteries. My thumb turn is stuck or is very hard to turn, why? Some of the numbers on my keypad are not beeping, why?Ī lot of the time this is caused by a loose keypad connection, bent prongs in the connector, or a pinch in the wires.
#Milocks keypad door knob installation driver#
Make sure the driver bar is in the vertical position when installed and the deadbolt is in the unlocked position. If your deadbolt can only be turned when the key is in the cylinder you have installed the lock incorrectly. Why does my deadbolt only lock or unlock when the key is in the cylinder? Replace the batteries as soon as you get this signal to avoid any issues. When the batteries start to go low, you will get a low voltage beeping signal from the lock.
How do I know when the batteries are low? To avoid any issues, you should always replace batteries before they are completely dead. In case you let the batteries completely die before replacing them, you always have your traditional key as a back up entry method. While facing the door as if you were entering, if the door hinges are on the right you have a right handed door, and if the hinges are on the left you have a left handed door. How do I know if I have a left handed or right handed door? Set the switch to “1” for right handed doors, and set to “2” for left handed doors. The switch is labeled 1-2 and it is located on the back module next to the “C” and “S” buttons. If your deadbolt lock is working in reverse, meaning it locks when you press the unlock button and vice versa, you have set the left/right handed switch incorrectly. Why is my lock working in reverse when I press the lock/unlock button?
0 kommentar(er)
